SECTION 1: Layer 2 Technology
Configure the ACME Headquarters network (AS 101) as per the following requirements
The VTP domain must be set to CCIESKY
Use VTP version 2
SW1 must be the VTP server and SW2 must be the VTP client
Secure all VTP updates with an MD5 digest of the ASCII string “CCIELab"
In order to avoid as much as possible unknown unicast flooding in all vlans the administrator
requires that any dynamic entries learned by other SW1 and SW2 must be retained for 2 hours
before being refreshed.
Configure the network of the New York office (AS 301) as per the following requirements
The VTP domain must be set to CCIESKY
Use VTP version 2
SW3 and SW4 must not advertise their vlan config but must forward VTP advertisement that they
receive out their trunk ports
Secure all VTP updates with an MD5 digest of the ASCII string “CCIELab”
Solution
On SW1
Vtp domain CCIE
Vtp version 2
Vtp mode server
Vtp password CCIELab
Mac address-table aging time 7200
On SW2
Vtp domain CCIE
Vtp version 2
Vtp mode client
Vtp password CCIELab
Mac address-table aging time 7200
On SW3 & SW4
Vtp domain CCIE
Vtp version 2
Vtp mode transparent
Vtp password CCIELab
